![]() |
![]() |
![]() |
For use in reducer/increaser situ- ations. Aluminum with many available in brass and stainless steel. Coupler in.       Adapter in.       1.5                 2.0       1.5                 3.0       Fab       1.5                 4.0       Fab       2.0                 1.5       2.0                 3.0       2.0                 4.0       2.5                 4.0       3.0                 2.0       3.0                 2.5       3.0                 4.0       4.0                 2.0       4.0                 3.0       4.0                 6.0       5.0                 4.0       6.0                 4.0 |
Dust cap fitted with overlock handles that are designed to utilize a locking device. The lock hasp fits through the 'eye' in the handles and the dust cap chain lug. |
![]() |
![]() |
When components of the transfer lines must be periodically disassembled for cleaning or maintenance, these fittings should be used. A gasket is utilized to seal the joint between the fitting and the pipe. Avail- able in aluminum, brass and stainless steel. Gasket options are available. Adapters are available in all standard sizes from 1" to 10". We also stock 3" adapters with 2" straight thread and 4" adapters with 3" straight thread. Couplers are available from 2" to 10" in even sizes. | |
![]() |
Spool adapters find many appli- cations in joining lengths of hose to- gether. Aluminum, brass and stainless steel in all sizes, as well as reducer/ increaser models. |
|
![]() |
![]() | |
Stainless steel hose shanks with male thread NPT. Also available in British threads. Part MBS suitable for use with clamps employing collars. 1", 1 1/2", 2", 3", and 4". |
These fittings employ flanges that conform to ASA specifications. Available in aluminum, brass and stainless steel. Sizes 1", 1 1/2", 2", 2 1/2", 3", 4", 5", 6" and 8". |
![]() |
![]() |
Flanged fittings that are specifically designed for tank truck use and are only available in aluminum. Sizes avail- able are 3", 4" and 6". |
A 90 degree coupler with intergral check valve requir- ing less than 3/4 psi pressure to open the valve. Prevents back-flow when pressure is reduced. Many applications where run-off of product is undesired. Aluminum and brass in sizes 1 1/2", 2", 2 1/2", 3" and 4". A Part D with the added feature of having a sec- ondary latching mechanism employed into the handle movement as the coupler handles are closed. Once closed, the handles cannot be released without releasing the secondary latch. |
These assemblies must be used in sets. Both contain self-actuating pop- pet valves. Used where connecting or disconnecting must be done without spillage. Available in 2, 3 and 4 inch models in aluminum and stainless steel. A special dust cap is available for the adapter. WARNING! Do not make a con- nection or disconnection while the system is under pressure. |
![]() |