CONVEYOR ACCESSORIES - WIREGRIP BELT HOOKS

SPECIFICATIONS
HOOK
SIZE
BELT
THICKNESS
MINIMUM
PULLEY
CONNECTING
PIN
WIRE
DIA.
LENGTHS
PER BOX
W1D1/16 - 3/322".081.0408
W1A3/32 - 1/82".081.0408
W11/8 - 5/323".081.0408
W25/32 - 3/163"6/64.05412
W33/16 - 1/43 1/2"6/64.05412
W41/44"7/64.05412
W4 1/21/4 - 5/165"8/64.05412
W55/165"9/64.05412
W63/86"10/64.05412
W713/326"10/64.05412

Only WIREGRIP belt hooks have a true staggered grip that prevents adja-
cent hooks from perforating belt material in a straight line. The result? Only half
as many perforations across any straight line...and more tensile strength per inch of
belt width.

What's more, each WIREGRIP belt hook is independant of the next one in line, for extra flexibility
when using belts over crowned pulleys or in troughing configurations.

There's no waste with WIREGRIP belt hooks, either. Short ends can be ganged together in the
lacing tool. A special binder strip keeps the WIREGRIP belt hooks in perfect alignment during
installation. Therefore, there is no messy paper carding. Specially sharpened hooks penetrate the
belt with minimal effect on the fabric.

WIREGRIP belt hooks are available in ten sizes, for belt material from 1/16" to over 3/8". All
strips are 12" long and are packaged with and without pins. For sizes 1D, 1A and 1 each box
contains eight 12" strips. For sizes 2 through 7, each box contains twelve 12" strips.

HINGE PINS

NCW -Nylon Coated
NCWS -Nylon Coated
Stainless Wire
NCC -Nylon Coated
Steel Cable
PINPACKS OF
24 - 12"
CONTINUOUS LENGTHS
PRICED PER FT.
SIZENCWNCW NCWSNCC
.081XXX-
6/64XXXX
7/64XXXX
8/64XXXX
9/64XXXX
10/64XXXX
X = Available - Not Available

Order by specifying type of pin, diameter, and length.
Example: 6/64 NCW 100 ft.


Revised: 21 Sep 97
Copyright © 1997 St. Louis Factory Supply Inc.
bobstlfs@juno.com

24-HOUR SERVICE 1-866-234-2358


[Toll Free] 1-866-234-2358
[Phone] (314) 842-6969
[FAX] (314) 842-1526

[Back] [Home] [Next]