Press BACK button for index

PLIED ENDLESS:
Used on belts with multi-
plied construction. All
belts are hot vulcanized
endless to assure a strong
sanitary joint.
PLIED PREPARED
ENDLESS:
The laps are prepared ex-
actly and protected from
the elements for your
use. The belts can be hot
or cold vulcanized in the
field.
FINGER SPLICED:
Used primarily in the
thermo plastic style belt-
ing. Fingers will vary in
length and design de-
pending on belt style.
The splice is almost in-
visible when completed.
SKIVED:
Used on some PVC belt-
ing and most all nylon
core belting. Belts can
be made endless or pre-
pared for field splicing.

LONGITUDINAL
SPLICING:
Most all belts can be
made to unlimited
widths. Style of splice
per width is determined
by style of belt.
HOLE PUNCHING:
All belts can be hole
punched for elevator
buckets or vacuum appli-
cations.
PULLEY LAGGING:
Pulleys can be com-
pletely lagged in or fac-
tory or we can supply all
the materials needed for
you to do the job.
COVERED BELTS:
All flat, timing and vee
belts can be covered with
pure gum, neoprene or
rough top surface.

VEE GUIDE:
Can be hot molded to al-
most any belt listed.
Guide can be molded to
the top or bottom and
notched if needed.
FLANGES:
Belt can have molded
gum drops or vee guides
on each edge to stop
product spillage.
FLEXIBLE WALL:
Corrugated walls can be
added to most belts and
can be made of SBR,
neoprene, PVC or white
BUNAN. Check factory
for wall heights and
minimum pulleys.
Our modern fabrication
equipment can be used
for any special belts you
need. Call with your re-
quirements.
YOU NEED IT -
WE CAN MAKE IT.


Revised: 21 Sep 97
Copyright © 1997 St. Louis Factory Supply Inc.
bobstlfs@juno.com

24-HOUR SERVICE 1-866-234-2358


[Toll Free] 1-866-234-2358
[Phone] (314) 842-6969
[FAX] (314) 842-1526

[Back] [Home] [Next]